Marley Birkdale: 600mm x 300mm

Marley Birkdale Slates: 600mm x 300mm

The Marley Birkdale, the versatile fibre cement roofing slate featuring a smooth surface and realistic, dressed edges. Available in a traditional blue-black colour option, the overall effect is exceptionally authentic.

Birkdale slate are lighter than a traditionally quarried slate, and easier to work – without wet cutting. The slate can be scored and snapped over a straight edge or cut with a 3.5mm toothed hacksaw.

Here is a fixing guide for these slates:
Marley Birkdale Fibre Cement Slates Fixing Guide.

Marley Birkdale slate is manufactured from a blend of Portland cement and water, mixed with synthetic and natural fibres.

Features & benefits:

• Smooth surface finish with dressed edges.
• An affordable alternative to traditional slate.
• Minimum pitch of 15º with hook fixing - these slates are un-holed.
• Proven to deliver 60+ years life expectancy.
• Manufactured from mixed Portland cement, water, natural & man-made fibres.
• UV resistant acrylic face – wax coating on the back.
• Product Code: 1404.
• Manufacturer: Marley Eternit.
• Size: 600mm x 300mm (600mm x 600mm slate also available).
• Colour: Blue-Black.
• Avg. Guideline Weight: 20.5 kg/square meter (dependent on pitch/lap).
• Meets BS EN 492.
• ‘Very Good’ BES 6001 (Responsible Sourcing) rating can achieve 3 credits.
• Fully recyclable, with a low carbon footprint of 13 CO2e/m2.
• Coverage: Approximately 14 slates / m2.
• The slate is recyclable.
• Fibre Cement Datasheet.

Buyers notes:
As with all fibre cement slates, it is recommended that only copper fixings (copper nails & copper disc rivets) are used.

Due to the close-fitting nature of fibre cement slates, in accordance with BS5250, ventilation of the roof space is required (normally at eaves and at high level). The easiest way to achieve this is to install eaves vents and dry ridge systems.